Step-less automatic voltage regulation – ideal for 95% of all applications
Protection against over and under voltage sags and surges in the mains supply which can last up to several days
Inbuilt protection against all too common damaging voltage spikes and transients
Output Voltage Accuracy of 12%
Minimal annual, or bi-annual, requirement, deliverable by local competent electricians
Ability to bypass the electronic control circuity in the unlikely event of a system malfunction
Designed, manufactured and supplied to comply with leading international standards
Ability to support loads with inherent initial high currents on start up
| RATINGS | D MODELS (1 – 2,5 – 3,5 – 5 (kVA))|H MODELS(7,5 – 10 – 15 (kVA)) |
| INPUT VOLTAGE RANGE | Standard (160 to 250 V)(130 to 230 V)(180 to 280 V) |
| OUTPUT | Default 220 12% / 230 / 240 |
| OPERATING FREQUENCY | 50 / 60 Hz |
| OVERLOAD RATINGS | 200% for 10 Seconds |
| RESPONSE TIME | 80 Volt / Second |
| RECOVERY TIME | 900 msec. (160 V AC – 250 V AC to the change) |
| EFFICIENCY | > 95% |
| WORK TECHNIQUE | Microprocessor controlled, fully automatic servo control |
| DISPLAY AND BUTTONS | True RMS digital multimeter, the microprocessor |
| MEASURED VALUES OF MONITORING | Respective input and output voltage reading |
| SETTING OUT OF TOLERANCE | Numerical ability to pre-set menu |
| OUTPUT DELAY TIME SET (OPTIONAL) | Numerical ability to pre-set menu |
| UPPER LIMIT CUT OUT SET (OPTIONAL) | Numerical ability to pre-set menu |
| LOWER LIMIT CUT OUT SET (OPTIONAL) | Numerical ability to pre-set menu |
| BYPASS | Manuel main-voltage regulator selective interruption switch |
| OPERATING TEMPERATURE | 0 / 50°c |
| PROTECTION LEVEL | IP 20 / IP 25 |
| RELATIVE HUMIDITY | More than 90% of the DIN (40040) |
| MAXIMUM ALTITUDE | 2000 Metre |
| ACOUSTIC LEVEL | Less than 50 dB |
| DOCUMENTS | CE – ISO 9001 – OHSAS 18001 – ISO 14001 |
