Digitally controlled voltage stabilisation
Maintenance-free Thyristor Technology
Customizable structure for customer demands
Three Phase 200 to 3500 Kva
“Low Voltage up to 60%. High Voltage up to 45%.”
“± 2% (Default) – adjustable from ± 2% to
±6%, (dependent on input swing ).”
Protects loads against harmful high-energy
surges, transients and spikes.
Independent phase voltage sensing and control to ensure the individual phase voltages remain stable -regardless of load
unbalance .
Protection of the load in the event of phase failure.
All operating parameters can be monitored from this panel and some operating parameters can be adjusted.
Isolation Transformer, Outdoor Enclosures, Output Circuit Breaker, Lightning Surge Arrestors.
| WORK TECHNIQUE | Microprocessor Controlled Thyristor Technology |
| Thyristor Configuration | 6 Thyristor 8 Thyristor 10 Thyristor |
| Input Voltage Swing Variant Options Available: | Swing Model No A* Window A 1 275 – 435 V AC A 2 310 – 450 V AC A 3 220 – 400 V AC |
| Output Voltage: | Presettable for any voltage between 380/220V, 400/230V & 415/240V |
| Output Voltage Accuracy: | ± 2% |
| Frequency: | 50 HZ ± %5 |
| Overload Capacity: | 10 seconds. 200% load |
| Efficiency: | > 95% At full load |
| Response Time: | 20 msec |
| Correction Speed | 500 Volt / Second |
| Output Delay Time Set | Numerical ability to pre-set menu |
| Manuel By-Pass | Manuel main-voltage regulator selective interruption switch |
| Environment | Temperature range 0 to 50 °C ,Suitable for indoor use, Maximum altitude 2000m. |
| Construction: | Free standing enclosures to IP20 IP54 Enclosures available as an option |
| Paint Colour: | As standard RAL 7024 (Graphite Grey) – Epoxy Powder Coating. Other colours available as an option on specific request |
| Cooling: | Forced air cooling with thermostat controlled fan |
| Standard Features: | Input Circuit Breaker Output Contactor Over/Low Voltage Protection Phase Failure Protection Front Status LCD Panel with Voltmeter |
